Vector Series - Extrude Hone Equipment

Home

Industries

Aerospace Automotive OEM Automotive Racing Die & Mold Diesel Fluid Power High Purity Medical General Engineering

Process

AFM MicroFlow AFM ECM/ECD TEM

Products

Standard Equipment Repurchase Equipment AFM Media Full Circle

Contact

Support Worldwide Questions

Schedules

Trade Shows Demo Coach Digital Media News Home

1-800-367-1109

Precision Surface and Edge Improvement

Vector Series abrasive flow machines have been redesigned through a joint effort between Extrude Hone Corporation and its customers. Over three hundred existing machine customers were contacted to provide input concerning a new machine design. The customers were asked for suggestions concerning machine operation, ease of maintenance, ergonomics and safety. The result is an extremely flexible Vector Series that is capable of polishing large extrusion and forming dies, multiple workpieces at one time and production deburring. The working tabletop has been lowered and enlarged, to accommodate bulky and heavy components. The abrasive media cylinders can be provided in sizes ranging from 4 inch diameter to 12 inch diameter. The Vector and the Vector HP offer a choice of pressure ranges to meet specific production requirements. Another standard feature on the Vector Series is the touch screen operator interface terminal which simplifies all machine functions in both an automatic or manual mode. This machine can also be ordered with optional flow control.

Download Vector Spec Sheet

Machine Specifications

Height fully open:
102 in (2590.8 mm)

Height closed:
92 in (2336.8 mm)

Width:
52.5 in (1333.5 mm)

Depth:
42 in (1066.8 mm)

Tabletop height:
41 in (1041.4 mm)

Working distance between clamp columns:
36 in (914.4 mm)

Estimated weight:
4,300 lbs (1955 kg)

Media Delivery
Media delivery is reciprocating by design with the assemblies consisting of opposing media cylinders, pistons, cups, and caps. Media delivery is powered hydraulically.

Clamping
Clamping is powered hydraulically.

Stroke:
20 in (508 mm)

Maximum opening:
22 in (558.8 mm)

Minimum opening:
2 in (50.8 mm)

Hydraulic Specifications

Main components of the hydraulic system are a hydraulic power unit, two media hydraulic cylinders, and two clamp cylinders with an air/oil pump assist.

Standard Power Unit

Reservoir:
20 gallon (75.7 L)

Pump capacity @ 1750 rpm:
5 GPM (18.9 L/m)

Pressure:
350-1500 psi (23.8 - 102 bar)

Clamp Cylinders

Bore diameter: 5 in (127 mm)
Stroke: 20 in (508 mm)

Electrical Specifications

The machine is controlled by a PLC and the operator interface terminal is touch screen. Standard functions include remote media pressure adjustment, real time display of media piston position, automatic and manual mode, a displacement counter, a cycle counter, and a cycle timer. The machine process parameters are preset via the operator interface terminal and can also be monitored on the terminal once the automatic cycle is initiated.

Electrical
Voltage: 3 phase/230/460 volts/60 Hz.
Motor: 5 hp
Peak Amperage: 15/7.5 amps

Controls
Controller: PLC

Fluid Connection Specifications

Hydraulic
Ports: NPT

Hose/Tube: 37° JIC

Water

Ports: NPT

Hose/Tube: NPT and/or Push Lock

Pneumatic

Ports: NPT

Hose/Tube: Push Lock

System Configuration


	media cylinder dia.	hydraulic cylinder dia.	media stroke length	media capacity	hydraulic flow rate	media flow rate	standard power unit
Vector 100	4"	6"	12.5"	157 cu.in.	5 gpm	2.2 gpm	5 hp
	(100 mm)	(150 mm)	(320 mm)	(2.6 L)	(18.9 L/m)	(8.3 L/m)	(3.73 kw)
Vector 150	6"	6"	12.5"	353 cu. in.	5 gpm	5 gpm	5 hp
	(150 mm)	(150 mm)	(320 mm)	(5.8 L)	(18.9 L/m)	(19 L/m)	(3.73 kw)
Vector 200	8"	6"	12.5"	628 cu. in.	5 gpm	8.8 gpm	5 hp
	(200 mm)	(150 mm)	(320 mm)	(10.3 L)	(18.9 L/m)	(33.3 L/m)	(3.73 kw)
Vector 250	10"	6"	12.5"	981 cu.in.	5 gpm	14 gpm	5 hp
	(255 mm)	(150 mm)	(320 mm)	(16.1 L)	(18.9 L/m)	(53 L/m)	(3.73 kw)
Vector 300	12"	8"	12.5"	1413 cu. in.	5 gpm	20 gpm	5 hp
	(305 mm)	(200 mm)	(320 mm)	(23.2 L)	(18.9 L/m)	(76 L/m)	(3.73 kw)

Vector series

Vector High-Pressure (HP) series

min/max media pressure	max* expansion dia.
775/3000 psi	5"
(53/204 bar)	(127 mm)
350/1500 psi	7.4"
(24/102 bar)	(188 mm)
200/900 psi	9.9"
(13.6/61 bar)	(252 mm)
125/600 psi	12.3"
(8.5/41 bar)	(312 mm)
90/375 psi	14.8"
(6/25.5 bar)	(376 mm)

min/max media pressure	max* expansion dia.
N/A	N/A
N/A	N/A
350/2400 psi	6.5"
(24/163 bar)	(165 mm)
200/1440 psi	8.7"
(13.6/98 bar)	(221 mm)
125/960 psi	10.9"
(8.5/65 bar)	(277 mm)
90/600 psi	13"
(6/41 bar)	(333 mm)

Standard Power Unit
	Reservoir capacity:	20 gallon (75.7L)
	Pump capacity:	@ 1750 rpm: 5 gpm (19 L/m)
	Pressure:	350/1500 psi (24/102 bar)
Clamping Cylinders
	Bore diameter:	5 Inches (127 mm)
	Stroke:	20 inches (508 mm)
Electrical
	Voltage:	3 phase/230/460 volts/60 hertz
	Motor:	5 hp (3.73 kw)
	Peak amperage:	15/7.5 amps

Controls*
	Std. controller:	Micro Logic 1200
Weight
		Average: 4000 lbs. (1,814.37 kg)

* other controls available as option

Terms & Conditions
Deburring, Polishing and Surface Finishing - Extrude Hone Corporation®